1:2 Component Audio over CAT5

The 1:2 Component Audio over CAT5 extends and duplicates your audio and component video signals at distances of up to 1000 feet away. Remote AV signals are received from the 1:2 Component Audio over CAT5 Sender unit, via industry-standard CAT5 network cables.

The 1:2 Component Audio over CAT5 will extend Analog Component as well as Analog Audio or Digital Audio via S/PDIF or TOSlink and provide two full sets of AV signal output on the receiving end. Audio is transmitted digitally over the CAT-5 cable and both the analog and digital audio outputs are active on the receiver side.

How it works

The 1:2 Component Audio CAT5 Distribution Amplifier Sender unit is placed at the source location. A standard CAT5 cable is run from the 1:2 Component Audio over CAT5 Sender to the 1:2 Component Audio over CAT5 Receiver unit. The 1:2 Component Audio over CAT5 Receiver unit connects to your remote HDTV component video displays, and audio inputs.

Note: Both analog and digital audio outputs are active on the receiver side when two-channel analog audio is used. If multi-channel digital audio is used, then the analog audio outputs will be inactive.

Package Includes:

* 1:2 Component Audio over CAT5 Sender
* 1:2 Component Audio over CAT5 Receiver
* 5V DC power supply
* User's Manual

Features:

* Supports up to 1080p component video
* Supports analog L+R audio and multichannel digital audio via optical Toslink or S/PDIF jacks
* Simple plug-and-play installation
* Equalizations for different CAT-5 skews
* No loss of quality over long distances

Specifications:

* Video Amplifier Bandwidth: 350 MHz
* Input Video Signal: 1.2 Volts p-p
* Input Sync Signal: 5 Volts p-p (TTL)
* Horizontal Frequency Range: 15-70 KHz
* Vertical Frequency Range: 30-170 Hz
* Video In/Out: 6 RCA component
* Audio In/Out: 4 RCA Audio, 2 SPDIF, 2 TOSlink
* Link Connector: RJ-45 Shielded
* Power Supply: 5V DC
* Power Consumption: 20 watts (max.)
* Shipping Weight: 5 lbs.